6,256 part numbers: Brake Wheels & Discontinued Brake Parts
13,785 part numbers: Motion Control Products
5,547 part numbers: Cable & Hose Management Systems
3,633 part numbers: Cable & Hose Management Systems
6,250 part numbers: Electrical Control Products
6,399 part numbers: Motor Mounted Brakes
15,025 part numbers: Electrical Control Products
110 part numbers: Fastening Solutions
2,581 part numbers: Radio Remote Control
176 part numbers: Mechanical Power Transmission Products

Aero-Motive Direct
Amazon Store

684 part numbers

Gemco Direct
Amazon Store

5,913 part numbers

Gleason Direct
Amazon Store

981 part numbers

Telemotive Direct
Amazon Store

22 part numbers
Web: Email: Phone: (888) 861-8777
Secure Online Order

Secure Online Order
15,025 part numbers available for
online order
Shopping Cart
All products are covered by a $1,000,000 liability insurance
Frequently Sold
Replacement Parts
Web Site Features
Part Number Lookup
Enter at least three characters of a Hubbell part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
Part Number:

Search scope:
This web site only
All BPI web sites
Formal PDF Quotation
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
Your shopping cart is kept intact and you can still check out at a later time.
AC Magnetic Motor Controls

AC Magnetic Motor Controls
AC controllers for use with new or existing wound rotor or squirrel cage motor drives featuring contactor type secondary control or solid state four quadrant speed regulation. They are ideal for motor primary or secondary controls, eddy current brake hoist, counter torque hoists and life bridge controllers. Also available are adjustable frequency drives. Hubbell AC Motor controllers are designed to meet your specifications and constructed to fit you space.
AC/DC Solid State Motor Controls

AC/DC Solid State Motor Controls
Hubbell's S2MC Solid State Stepless Motor Controls are ideal for controlling overhauling loads such as lift bridges, bridge cranes, bucket/grapple cranes, portal/whirly cranes, turbine cranes, tramways, and coke oven drives.
Utilizing AC induction motors (squirrel cage and wound rotor) the line of S2MC controllers are available in both primary thyristor (4920 series) and secondary thyristor (4940 series) through 500 hp, or more, and capable of operating on 208/230/380/460/575, 3 phase VAC, 50/60 Hz. The line of S2MC controls have been successfully applied on hundreds of applications for over 15 years.
Magnet Controls

Magnet Controls
Hubbell Euclid Magnet Controllers utilize heavy duty components and circuitry arranged to provide optimum control of your lifting magnet. Full featured NEMA Type 1 or 3R enclosed magnet controllers are available for immediate shipment. Of course, we welcome inquiries for custom applications as well.
DC Devices

DC Devices
The latest addition to the Hubbell Industrial Controls family are DC Devices used in solid-state adjustable speed drives, uninterruptable power supplies, fuel cells, crane controls, transit and rail vehicles, gas and oil well drilling equipment, mining machinery, and more. These devices are ideal for a wide range of heavy duty applications.
DC Magnetic Motor Controls

DC Magnetic Motor Controls
The most complete line of standard and custom controllers. All controllers are front wired, from connected and front accessible in NEMA rated contactor sizes 0 through 8 for EOT crane control, dynamic lowering and reverse-plugging installations. Also available are mill auxiliary controllers, special circuits to meet custom installation requirements and special construction to meet customer specifications.
Disconnect Switches

Disconnect Switches
Type 4245: The Manual-Magnetic Disconnect Switches are combinations manually and magnetically operated contactors enclosed in a NEMA Type wall-mounted enclosure.
The contactors for the disconnect switches are the same as the contactors used on Euclid's crane and mill type magnetic controllers. Silver faced contacts are standard.
Type 5410: Fused Disconnect - Rated 30amp-200amp. UL Listed.
Electronic Components

Electronic Components
The Bulletin 5330 Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls. The master unit is a complete frequency relay providing one point of frequency detection.
The Bulletin 5350 Static In-Line Timer is a solid state timing unit for use in AC or DC contactor and relay control.
The Bulletin 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted.
The Bulletin 5370 Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.
Limit Switches

Limit Switches
Type 4220: D-C Limit Switches are devices that are used to interrupt the main power circuit, setting up a dynamic braking circuit that quickly stops hook travel with a minimum of drift.
A-C Limit Switches are similar in construction to D-C Limit Switches. The difference is in operation. A-C Limit Switches disconnect two power lines to the hoist motor which then is stopped by a magnetic brake.
Type 4225: Euclid quick break limit switches for hoists are normally closed by the weight of the striking lever. The movement of the lever on its upward travel, when engaged by the hoist hook block on its upward travel, causes the switch to quickly break the circuit to the motor with very little upward movement of the crane hook. The switch is automatically reset by the weight of the striking lever when the hook is lowered.
AC/DC Contactors and Relays

AC/DC Contactors and Relays
Rugged Euclid contactors feature many unique design and engineering advancements that greatly simplify applications, installations and servicing. Over 65 years of experience in design as well as manufacturing has been incorporated into these highly reliable units.
DC Relays, Type 5320, general purpose control, voltage sensitive, current, and plugging relays are built to withstand severe service using the latest technology in materials for insulating and high-strength. They are recommended for use on heavy industry dc drives such as cranes and mill auxiliaries.
Master Switch/Drum Controllers

Master Switch/Drum Controllers
Type 4211 Mini-Master: The Euclid Mini-Master Switch uses a handle operated cam switch mechanism in a NEMA rated housing. It is engineered for use where master switch control is preferred, for CMAA duty overhead crane and similar applications.
Type 4216 Mill Master: These master switches are of rugged construction to withstand the rough service encountered on applications in the steel mills, such as crane, coal, and ore bridges, blooming and rolling mill auxiliaries, etc., where either floor or desk mounting is required.
Type 4253: Master Switches are used to provide single handle pilot control of hoists, cranes, oven pushers, car movers and other equipment requiring speed steps of wound rotor or direct current motors.
Type 4258: Drum Controllers start, stop and change the speed and/or rotating direction of reversible AC and DC electric motors.
Magnetic Drum Brakes

Magnetic Drum Brakes
Class 5010 Type F: Magnetic drum brakes are spring set, electrically released, drum type friction brakes which are used with either AC or DC motors, used as holding brakes on DC series motor drives, crane hoists, mill drives, and transfer cars.
Class 5060 Type AT: Adjustable torque brakes are dual-purpose, drum-type friction brakes that combine an electrically released, spring-set holding brake with an electrically operated, adjustable torque stopping brake within one brake frame.
Class 5010 Brake Rectifier: Converts AC line power to DC for use with a rectifier operated brake. A high speed forcing circuit provides optimum operation of the brake.
LED Bridge Crane Lighting

LED Bridge Crane Lighting
LED Bridge Crane Lighting: The HBLC LED Highbay is specifically designed to be used on heavy industrial bridge cranes while utilizing AC or DC input voltage. Custom engineered LED optics provide evenly distributed light for bridge crane operators and others working under the crane for increased visibility and safety.
Pendant Pushbutton Stations

Pendant Pushbutton Stations
HD stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.
Power Resistors

Power Resistors
Hubbell Type SSR Power resistors from 1.3 amps through 101 amps are available, from unassembled to completely assembled in frames with covers. Standard assemblies are pre-engineered for primary or secondary resistance, and are used in typical applications such as motor starting or dynamic braking. Construction elements are stainless steel around a porcelain insulator, manufactured for endurance and reliability.
Heavy duty Types K1 and HHC resistors also utilize continuous stainless steel elements, with no weld joints where hot spots could develop. These resistors are available in ranges from 38 amps to 695 amps.
Pressure Switches

Pressure Switches
Hubbell pressure switches provide automatic control for air or water systems such as compressors, dry sprinkler systems, and well pumps or pumping systems. Thousands of variations are available to provide maximum flexibility at minimum cost.
Speed Switches

Speed Switches
Speed responsive switches detect motion, or sense over-speed or under-speed occurrences of industrial machinery or motors. Hubbell Industrial Controls, Inc. has both direct coupled or non-contact type switches for; directional, non-directional, plugging, anti-plugging, over-speed, under-speed, and also zero-speed applications. Many enclosure styles are available including surface or flange mounting with NEMA 3, 4, 7, 9, 10 or 13 construction.
Radio Control Products

Radio Control Products
A typical radio remote control system consists of a portable transmitter carried by the operator, and a receiver installed on the crane, the locomotive, or other remote machinery. Each system operates on a licensed frequency in the 72 to 76 MHz or the 450 to 470 MHz bands, requiring the user to have an FCC license for the transmitter.
EC&M DC Crane Control

EC&M DC Crane Control
These mill duty DC crane control panels are used to operate DC series wound motors in both hoist and travel drive applications. This control meets AIST and NEMA standards, and have been developed and refined by EC&M over the last 100 years.
Line-Arc AC and DC Contactors

Line-Arc AC and DC Contactors
Class 7004 Type M Line-Arc® DC Contactors: Extremely rugged, mill duty DC contactors. Built of the highest-grade materials and tested to the toughest duty standards, Type M contactors feature the LINE-ARC method of arc extinction for the longer tip life. The Type M also features steel pan mounting and readily accessible power and control terminations.
Class 8503 Type M Line-Arc® AC Contactors: AC version of our Class 7004 Type M contactor. Ideally suited to control AC mill motors, these contactors are designed especially for heavy industry AC drives, such as cranes and mill auxiliaries. Furnished with a DC operating coil, rectifier blocks are available to supply power for several contactors.
Lifting Magnet Controllers

Lifting Magnet Controllers
  • MAGNIFIER DC Class 6845
    Digital DC Magnet Control
  • Class 6805 MAGNIFIER
    AC Type R Magnet Controller
  • Class 6815 Type A Lifting
    Magnet Controllers
  • Class 6815 Type M
    Magnet Controllers
  • Class 6815 Type MF Magnet
    Controllers with Fanning
  • Class 6815 Type MG1 Lever
    Lift-Drop Master Switch
Power Limit Switches

Youngstown Power Limit Switches
This OSHA-required switch limits crane hoist over-travel in the hoisting direction. It is operated by the crane hoist hook block and directly interrupts the hoist motor current. EC&M created the first power limit switches used on cranes to help provide the highest level of crane safety. Youngstowns feature an automatic gravity reset mechanism, sealed bearings, and right- or left-hand operating arms.
Replacement Parts

Replacement Parts and Modification Kits
  • Class 9998 DC Coil
  • Class 9998 Replacement
    Parts Kits
  • Class 9999 Type MX11
    Electrical Interlocks
  • Class 9999 Type Al1 Arc
  • Class 9999 Types MM1, MM2,
    MM3, MM4, MM5 Mechanical
  • Class 9999 Types KX3, KX4,
    KX5 Contact Kits
  • Class 9999 Type ML1 Lug Kit
  • Class 9999 Types MT1, MT2,
    MT3, MT4, MT5 Tie Bar Kit
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
Supplier of Industrial Brake Parts Since 1985